Publicité
Les langues disponibles
Les langues disponibles
3a. Manual Control Panel
Figure 3
• POWER BUTTON (Figure 3.A):
•
Press this button to power on the fireplace. Then you will hear a
"beep" sound. In the default setting, the flame is amber with the
highest brightness.
•
Press the power button to turn off the fireplace. You will hear the
"beep" sound twice. This machine remembers all the settings
(except the timer setting) and recovers those settings when you
power on the fireplace next time (Only if you never pull the
plug).
•
If the plug is unplugged or a power outage occurs, all the
settings will be back to the original default setting when turning
on next time.
• FLAME CONTROL (Figure 3.B):
•
Press the flame control button to switch the flame color among 5
settings.
•
When the product is off and plugged in, press and hold the
flame button for 6 seconds to turn off the beep sound of the
control panel.
08
Flame Color
Display
Flame Brightness
Amber
A
5 levels
Blue
M
5 levels
Polar
P
N/A
Breathing
H
5 levels
Violet
U
5 levels
Off
OFF
N/A
•
Press the UP (Figure 3.E) or DOWN (Figure 3.F) to adjust the
flame brightness, not including Polar flame.
•
There are 5 levels Flame Brightness: 5 level-highly bright, 4
level-fully bright, 3 level-medium bright, 2 level-low bright, 1
level-slight bright.
• HEATER CONTROL (Figure 3.C)
•
Press once to activate high heat setting. Press second time to
shut the heat off.
•
Press to start the heating function, and the system will set the
temperature to 99°F/37°C, the digital display screen will be
shown 95°F/ 35°C.
•
Press the UP (Figure 3.E) or DOWN (Figure 3.F) to adjust the
heater temperature.
Fahrenheit
95°F
94°F
93°F
92°F
Temperature
Celsius
35°C
34°C
33°C
32°C
Temperature
Display
shown
shown
shown
shown
Display
5~1
5~1
N/A
5~1
5~1
N/A
....
71°F
70°F
OFF
....
22°C
21°C
OFF
shown
shown
shown
shown
09
Publicité
