Grozone Control OSWDN Guide De L'usager page 6

All manuals and user guides at all-guides.com
SETTING THE DAY-NIGHT LEVEL
SETTING THE OSWDN IN A DARK DAY CONDITION
Your are in a DARK DAY condition : the photocell sensitivity is too low to
detect enough light to switch the upper output ON during the day. Using a
small screwdriver, rotate the DAY-NIGHT LEVEL SETTING "COUNTER
CLOCKWISE" until the upper output supplies 120V. Terminate the setting
by rotating further a few more degrees in the same direction. Turn the
lights ON and OFF in your grow room to validate the setting : the load
connected to the upper output should turn on when the lights are on in
the room.
SETTING THE OSWDN IN A CLEAR NIGHT CONDITION
Your are in a CLEAR NIGHT condition : the photocell sensitivity is too high
and detecting low amount of light that inappropriately switches the upper
output ON during the night. Using a small screwdriver, rotate the DAY-
NIGHT LEVEL SETTING " CLOCKWISE" until the lower output supplies
120V. Terminate the setting by rotating further a few more degrees in the
same direction. Turn the lights on and off in your grow room to validate
the setting: the load connected to the lower output should turn on when
the lights are off in the room.
Photocell in a 360° dome
ON / OFF SWITCHER
(↑ ↑ ↑ ↑ )
ON during the DAY
OFF during the NIGHT
_____________________________________________________________
(↓ ↓ ↓ ↓ )
ON during the NIGHT
OFF during the DAY
Day-Night
Level Setting
6