Grozone Control OSWDN Guide De L'usager page 5

All manuals and user guides at all-guides.com
OPERATION AND OPTIONAL SETTING
OPERATION AND OPTIONAL SETTING
Just plug your equipment into the top or bottom plug and you're set!
Your equipment will toggle ON or OFF as soon as the lights in your room
will switch ON or OFF.
Grozone OSWDN photocell sensitivity is factory set for proper Day-
Night detection. If the DAY-Night detection works just fine in your grow
room, do not touch to the DAY-NIGHT LEVEL SETTING. If the DAY-NIGHT
detection is not properly set, read the instructions below.
SETTING THE DAY-NIGHT LEVEL
The user can modify the photocell sensitivity to operate in a DARK
DAY or a CLEAR NIGHT condition.
•
What is a DARK DAY condition? A dark day condition is met when
the light level during the day is darker than factory set day level.
This situation may occur if your module is connected as the bot-
tom of a wall in a dark section of your grow room or in the
shadow of larger equipment. In this case, the controller may not
detect day condition even though the lights are on in the grow
room.
Example : Your CO2 controller stops enriching your room with CO2 dur-
ing the day, because it detects a NIGHT condition, even though your
lights are still lit in the room! You're probably experiencing a Dark DAY
condition...
•
What the CLEAR NIGHT condition? A clear night condition is met
when the light level during the night is brighter than factory set
night level. This situation may occur if some light leaks coming
from doors or windows prevent your controller to detect a real
night condition, even though the lights are in the grow room.
Example : Your CO2 controller keeps enriching CO2 day and night, be-
cause it detects a DAY condition even though your lights are OFF in the
room! You're probably experiencing a CLEAR NIGHT condition...
5
5