Royal CPR 28T Notice D'installation page 52

10.2 "ECO MODE" SAVING FUNCTION
Enabling this function means that the stove switches off when reaching the desired room temperature. If
this function is not enabled, the stove modulates operation so as to maintain the desired temperature while
To enable/disable the function:
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Select submenu
d) Set one of the following values using the
Eco
"Eco Mode" function enabled
Off
"Eco Mode" function disabled
e) Press
10.3 AUTONOMY FUNCTION
with pellets. Use the arrow buttons to move to the
on the stove.
The estimated values are quite reliable, as long "
completely. "Lo" indicates the reserve fuel level.
10.4 REFILL FUNCTION
In this way, the stove can estimate, based on the operating parameters, how many hours of autonomy remain
a) Use the arrow buttons
b) Use the
To disable this function, select "
10.5 RESTARTING AFTER A POWER FAILURE
In the event of power failures, the stove will switch back on automatically, checking the safety conditions, when
power returns.
10.6 "LOCK KEYPAD" FUNCTION
To enable/disable the function:
a) Use the arrow buttons
b) Use the button to select the password "7" and then press
c) Select submenu
d) Use the
Off
" " Lock keypad disabled
"Lo" Only the on/off button
Hi
" " Lock keypad enabled
e) Press
52
USE AND & MAINTENANCE
to go to the setup menu
[7]
to move to the fuel icon
FULL
buttons to select " " and press enter
OFF
" instead of "
to go to the setup menu
[10]
buttons to set one of the following values:
is enabled
and then press
.
buttons:
symbol and display the estimated operating hours before
FULL
and press ente
.
FULL
".
and then press
.
;
.
;