aqprox appUSB150 Guide De L'utilisateur page 70

150Mbps Wireless Lite-N USB Adapter – APPUSB150
2. The Auto Profiles Selection management window will appear (shown in Figure 3-11) with a
list of all created profiles in the Available Profiles.
3. Highlight the profiles to add to auto profile selection, and click Add. The profile will appear
in the Auto Selected Profiles box.
4. Highlight a profile in the Auto Selected Profiles box.
5. C lick Move Up or Move Down as appropriate.

Note:
The first profile in the Auto Selected Profiles box has highest priority, while the last profile has the
lowest priority.
6. C lick OK.
7. Check the Auto Select Profiles ch eckbox on the Profile Management tab (show n i n
Figure 3-2).

Note:
When auto profile selection is enabled by checking
Management tab, the client adapter
highest priority and the same SSID a s one of t he found networks will be u sed to connect to the
network. If the connection fails, the
matches the SSID until an available network is found.
User's Guide
Figure 3-11
Auto Select Profiles on the
will scan for an availabl e network. The profile
client adapter will try the next hi
English
Profile
with the
ghest priority profile that
68