Samsung HT-D5130 Guide D'utilisation page 25

DIGITAL
AUDIO IN
OPTICAL
Optical Cable
(not supplied)
Set-Top Box
OPTICAL
OPTICAL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
2. Press the FUNCTION button to select D.IN input.
•
The mode switches as follows : BD/DVD
✎
NOTE

To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.

This system supports Digital sampling frequencies of 32 kHz of higher from external digital components. This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.

This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.
AUX : Connecting an External Analog Component
Analog signal components such as a VCR.
1. Connect AUX IN (Audio) on the product to the Audio Out of the external analog component.
•
Be sure to match connector colors.
2. Press the FUNCTION button to select AUX input.
•
The mode switches as follows : BD/DVD
✎
NOTE

You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of
the VCR to this product.
HT-D5130_XAC_0201.indd 25 HT-D5130_XAC_0201.indd 25
All manuals and user guides at all-guides.com
Connecting Audio from External Components
HDMI OUT HDMI OUT
component has only one
Audio Out, connect either
FM ANT FM ANT
WIRELESS WIRELESS
Audio Cable
(not supplied)
If the external analog
left or right.
D. IN AUX R. IPOD
D. IN AUX R. IPOD
COMPONENT OUT COMPONENT OUT
AUX IN
VIDEO OUT VIDEO OUT
Red
White
VCR
AUX
W. IPOD FM
W. IPOD FM
25
English
2011-02-09 ¿ÀÈÄ 5:04:01 2011-02-09 ¿ÀÈÄ 5:04:01