Hansgrohe Raindance Select E 300 27387 1 Serie Instructions De Montage / Mode D'emploi / Garantie page 2

26469xx1
11¾" / 6¼"
27387xx1
Tools Required / Outiles Utiles /
Herramientas Útiles
17 mm
2
G ½
9⅝"
G½
English
Technical Information
Recommended water pressure
Max. water pressure
Recommended hot water temp.
Max. hot water temp
Flow rate
*Please know and follow all applicable local plumbing
codes when setting the temperature on the water heater.
Installation Considerations
• For best results, Hansgrohe recommends that this
unit be installed by a licensed, professional plumber.
• Please read over these instructions thoroughly
before beginning installation. Make sure that you
have all tools and supplies needed to complete the
installation.
• To prevent scald injury, the maximum output
temperature of the shower valve must be no higher
than 120°F. In Massachusetts, the maximum output
temperature can be no higher than 112° F.
• This showerhead is for use with automatic
compensating valves rated at 1.7 GPM (6.6 L/min)
or less.
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product in
a safe place. The receipt is required should it be
necessary to request warranty parts.
15 - 75 PSI
145 PSI
120° - 140° F*
140°F*
2.5 GPM