Ryobi PCG002 Manuel D'utilisation page 5

LED FUNCTION OF CHARGER
CHARGER LED
INDICATOR
POWER
EVALUATE
ERROR
• Try to repeat the conditions a second time by removing and reinstalling the battery pack. If the LED Error status
repeats a second time, try charging a different battery.
• If a different battery charges normally, dispose of the pack that received the Error (see your battery pack manual
for instructions).
• If a different battery also indicates Error, the charger should be replaced.
CHARGING
FULLY
CHARGED
WARNING:
When servicing use only identical replacement parts. Use
of any other parts can create a hazard or cause product
damage.
WARNING:
To avoid serious personal injury, always remove the bat-
tery pack from the tool when cleaning or performing any
maintenance.
NOTE: ILLUSTRATIONS START ON PAGE 6 AFTER FRENCH AND SPANISH
OPERATION
BATTERY PACK RED
STATUS LED
Without
ON
battery pack
Hot battery pack
Flashing
Cold battery pack
Deeply discharged
Pack inserted Flashing
Pack inserted OFF
Pack inserted OFF
MAINTENANCE
LANGUAGE SECTIONS.
GREEN
LED
OFF Ready to charge battery pack.
When battery pack reaches cooled temperature,
charger begins charge mode.
When battery pack reaches warmed temperature,
OFF
charger begins charge mode.
Charger pre-charges battery until normal voltage is
reached, then begins charge mode.
Flashing Battery pack or charger error.
Flashing Charging
ON Charging complete
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which can result in serious personal injury.
STORAGE
Always remove the battery pack before storing the charger
or any time the charger is unplugged.
5 — English
ACTION