Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
O
perations
Operating instructions
1. Check to see if the bag is securely
attached to the base and upper cord
wrap on the unit. The silver clasp that
slides onto bag to secure it should be
placed evenly on bag to avoid any air
leaks.
2. Plug cord into an electrical outlet.
3. Adjust the carpet height by turning round
knob near the foot of the vacuum to the
carpet height that best suits the carpet
area you are going to clean.
4. Step on the power switch located on
top of the heavy-duty metal hood. Press
down with foot and power will go on.
Step again on the switch and power
will shut off.
5. To detent the handle, push on the foot
pedal. Press down on it again and
handle will detent all the way to the
floor level.
6. You can now begin to vacuum.
NOTE: Always wrap cord around
cord hooks and fasten cord to
prevent unwinding.
6
WARNING:
To avoid injury, keep loose
clothing, hair, fingers, and all
other parts of body away from
any moving part (such as the
revolving brush). Turn off the
switch and unplug the cleaner
before changing the cleaner
height setting.
Publicité
