Publicité
Les langues disponibles
Les langues disponibles
•
This range hood is factory set for venting through the roof or wall.
•
Vent work can terminate either through the roof or wall. To vent through a wall, a 90° elbow is needed.
IMPORTANT:
NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceiling,
•
attics or garages. All exhaust must be ducted to the outside.
Use metal/aluminum duct work only.
•
Fasten all connections with sheet metal screws and tape all joints with certified aluminum or foil tape.
•
Please check the building codes in your city to learn which tape product is recommended
•
Use caulking to seal exterior wall or roof opening around the cap.
A1- Top venting Roof Exhaust
VENTING METHODS:
A2- Top venting Wall Exhaust
7
Publicité
