Ego Power+ LB4800-FC Guide D'utilisation page 14

ASSEMBLING THE BLOWER TUBE
WARNING:
injury, always remove the battery pack from the tool when assembling parts.
1. Align either of the grooves in
the tube with the knob on the
blower housing. Push the tube
onto the blower housing until
the knob engages the grooves
(Fig. 1&2).
2. Turn the tube in the direction
of the arrow until both of
the knobs slide into the lock
positions (Fig. 2&3).
14
56V LITHIUM-ION CORDLESS BLOWER — LB4800/LB4800-FC
To prevent accidental starting that could cause serious personal
1
Tube
Groove
2
3
Knob
Lock Position