Publicité
Les langues disponibles
Les langues disponibles
PC 2010
o Place the balance on a hard and level base.
o Lay the object to be weighed in the scale pan. When the arrow stops moving, the weight can
be read on the dia.
o Do not dip the balance in water.
o Handle the balance with care. It is a precision measuring instrument. Do not make it fall and do
not load it beyond the maximum weight.
Cleaning
Do not use abrasive cleaning agents, scourers, alcohol etc. to clean the scales.
Never immerse the appliance in water or rinse it under the tap.
Clean the appliance with a damp cloth and, if necessary, some mild cleaning agent.
Inserting the batteries
Please ensure the correct polarity. 1 x lithium battery (CR 2032)
1. Open the battery compartment on the bottom.
2. Connect the compound battery to the supply connection. Please ensure the correct polarity.
3. Close the battery compartment again.
4. If the device is not used for a prolonged period of time, please take the batteries out in
order to prevent leakage of battery acid.
Note: Do not dispose of batteries in the domestic waste. Please return used batteries to the relevant collection
points or the shop where they were bought. Never throw batteries into a fi re.
Weigh-in Function (TARE)
If you would like to weigh further ingredients for example, use the weigh-in function.
• Press the „ EIN/TARA" button again. The display returns to "0".
• Now place the ingredient in the pan of the scales. Only the actual weight of the added
ingredient is shown in the display. Repeat the above procedure if necessary.
When the scales are not being used they turn off automatically after approximately 2 minutes.
This prolongs the battery life. Alternatively you can press the „ AUS" button to switch the
device off.
Handle the balance with care. It is a precision measuring instrument. Do not make it fall and do
not load it beyond the maximum weight.
8
Publicité
