Publicité
Les langues disponibles
Les langues disponibles
❶ Using T1 open-end wrench loosen the stem binder bolt.
Figure 3.12
❷
front wheel.
❸ Tighten the stem binder bolt. Check the handlebar 4 binder
handlebar is clamped in place.
❹ Loosen all of the handlebar binder bolts to allow the
handlebar to move.
❺ Rotate the handlebar to the desired angle. Be sure that the
handlebar stays centred in the handlebar bracket.
❻
T2
stem stays even.
❼
handlebar is secure.
1
Handlebar
binder bolts
20
5
2
1
Stem binder bolt
Figure 3.12
27
Publicité
