Publicité
Les langues disponibles
Les langues disponibles
ATTACH THE HANDLEBAR
WARNING!
•
damage to the stem post, steering tube and result in lose of
control, serious injury or death. Ensure the minimum
top of the headset.
•
result in lose of control, serious injury or death. Always
check the handlebar cannot move and is secured to the
frame before riding the scooter.
❶ Turn the front fork to face forward. if the handlebar rod is pointing
upward , Rotate it downward and evenly tighten the four front piece
screws T2.
Picture Guide
❷ Insert the handlebar rod into the handlebar tube . Adjust
the height of the handlebars accoding to the rider's needs.
The maximum height is marked on the handlebar .Check
that the axis of the handlebars is parallel to the axis of the
front wheel.
❸
Using T1 wrench, tighten the stem binder bolt at the top of
the stem post. Check the handlebar binder bolt(s) to be sure
they are properly tightened and the handlebar is clamped in
place.
❹
Look at all the cables to be sure they run in a smooth arc
from the brake lever to the front brake or cable stop on the
frame. Important! If they are twisted or kinked, braking will
not work.
Note: See Page 21st: Adjusting the Handlebar if adjustments
are needed.
11
Figure 2.3
Publicité
