Publicité
Les langues disponibles
Les langues disponibles
OPERATION
1. Before inserting the plug into an electrical outlet, make sure that the electrical supply in
your area matches that on the rating label on the unit.
2. When plugged in, turn on the Main power switch at the back of the unit.
3. When in Standby mode, only the switch
touch, and the LED display shows the room temperature. Press
of the control panel.
a) Low Power: 1000W (Press
b) High Power: 2000W (Press
c) TIMER: Press this button
itself off (From 0 hour to 8 hours)
d) + , - : adjust room temperature .Temperature setting from 10-35 degree. "+" to
increase the desired temperature and "-" to decrease the desired temperature.
e) Osc: Press
f) Press
to turn off the heater, the unit will keep working 30 seconds of cool air after
turn off it . this design can protect item use longer.
Warning:
The heater will remain hot for some time after it is turned off; handle with care.
to switch it)
to switch it)
repeatedly to set a period after which the heater will turn
to activate oscillation. Press it again to cancel.
on the control panel will respond to your
3
to access the rest
Publicité
