Publicité
Les langues disponibles
Les langues disponibles
3.
With the fan assembly (2) positioned as shown in FIGURE C, angle the bottom to engage the side tabs (5) of the fan
assembly bracket with the notches (6) in the knockout brackets on both sides. Refer to FIGURE C and D.
2
2
2
5
FIGURE
C
2
FIGURE
D
4.
Rotate the top of the fan kit assembly (2) to engage the screw tabs under the screw heads as shown below in FIGURE E.
NOTICE: Be careful not to pinch fan wires.
2
6
PUSH
5.
Tighten both screws (3) (Refer to the section view in FIGURE F).
PUSH
FIGURE
E
3
FIGURE
F
2
Publicité
