Publicité
AUX leveling
1. Slightly tighten the four leveling nuts at the bottom of the platform before initial leveling.
2. Select "Settings" → "Level mode" → "AUX leveling" , click on the number
3. Adjust the platform height by turning the knob underneath. Use
apiece of A4 paper (standard printer paper) to assist with the
adjustment, making sure that the nozzle lightly presses on the
paper.
4. Complete the adjustment on all 4 corners.
5. Click the number ① to test the platform height in the middle.
28
1
②.
Publicité
