Publicité
Loading Filament
1. Preheat
Method 1
Method 2
2. Feeding
Press and hold the extruder lever and insert
the 1.75mm filament through the filament
detector and through the extruder motor.
Continue feeding until you see filament
extrude from the nozzle.
Tip : How to r eplace the Filament？
1、Cutting filament near the Extruder and slowly feed new
filament until they are fed into the new filament.
2、Preheating the nozzle and withdraw the filament quick-
ly and feed the new filament.
27
Publicité
