Publicité
Les langues disponibles
Les langues disponibles
Opening Your Trailer
1
Lift front frame at rear.
cHEcK tHAt tHE FrAME LAtcHES ArE ProPErLY EnGAGEd BEForE uSInG trAILEr.
Closing Your Trailer
1
remove passengers and
cargo, and then remove the
tow bar and both wheels.
note
damage to windows can
occur if trailer is folded with
wheels installed.
cArE MuSt BE tAKEn WHEn FoLdInG And unFoLdInG to PrEVEnt FInGEr EntrAPMEnt.
HonEY BEE
2
Pull rear frame tube towards you.
WARNING
2
From the front of the trailer,
lift the cover then press the
yellow release latches and pull
the rear frame through.
▼
WARNING
ENG
3
Squeeze frame tubes together with
both hands to latch securely in place.
3
Fold flat.
DEU
FRA
ESP
Installing the Wheel Guards
1
Insert the the wheel guard into the reciever. Slide the
wheel guard back until you hear it click into place.
repeat for other side.
Attaching & Removing
the Wheels
1
While pressing rubber
For removing wheel:
button, insert wheel axle
while pressing button,
into axle receiver, and
slide wheel out of the axle
then release the button.
receiver. release button.
Pull firmly on wheel to
confirm the axle is fully
engaged.
ASSEMBLY & uSE
2
9
Publicité
