Grozone Control TP3 Guide De L'usager page 4

All manuals and user guides at all-guides.com
INSTALLATION & OPERATION
Note: This unit has been set to perform 10°F setback. For 5°F setback,
refer to Optional settings.
Set Values
High Temp
Start delay
Plug into 120 VAC outlet (see security notice on page 1).
Place the sensor at desired location.
Connect the sense cord from light switcher into the front panel outlet.
Installation is now complete
Note: If TP3 is plugged into a 24h timer, deduct start delay from
24H timer start program (start time).
4
4