Samsung BD-ES5000 Manuel D'utilisation page 16

Network
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
Network setup directions start below.
NOTE
✎
▪ This unit can only be connected to a Network via
a wired connection.
Automatic Network Setup
1. In the Home menu, press the ◄► buttons
to select Settings, and then press the
ENTER button.
2. Press the ▲▼ buttons to select Network,
and then press the ENTER button.
3. Press the ▲▼ buttons to select Wired
Network Settings, and then press the
ENTER button. The Wired Network
Settings screen appears.
Settings
Wired Network Settings
Display
Internet Protocol Setup : Auto
Audio \
IP Address : 0 0 0 0
Network
Subnet Mask : 0
0 0 0
System
Gateway : 0 0 0 0
Language
Security
DNS : Auto
General
DNS Server : 0 0 0 0
Support
> Move " Select ' Return
4. In the Internet Protocol Setup field, select
Auto if it is not selected. (Press ENTER
select AUTO, and then press ENTER.)
16
02231Q-BD-ES5000-EN-ENG.indd 16
All manuals and user guides at all-guides.com
5. The Auto Function acquires and fills in the
values for IP Address, Subnet Mask,
etc., automatically.
NOTE
✎
▪ This process can take up to five minutes.
6. After the Network Function has acquired
the network values, press the RETURN
button.
7. Select Network Test, and then press
ENTER to ensure the player has connected
to your network.
8. When the Network Test is complete, press
the RETURN twice to return to the Main
Menu.
9. If the Network Function does not acquire
the network values, go to the directions for
Manual Setup.
Manual Network Setup
Before you start manual network setup, you
need the network setting values.
To get the Network setting values through
most Windows computers, follow these
steps:
■ Windows xP
1. Right click the Network icon on the bottom
right of the Windows desktop.
2. In the pop-up menu, click Status.
3. On the dialog that appears, click the
Support tab.
4. On the Support tab, click the Details
button. The Network settings are
displayed.
■ Windows 7
1. Click the Network icon on the bottom right
of the Windows desktop.
2. In the pop-up menu, click Network and
Sharing Center.
3. On the dialog that appears, click the Local
Area Connection or Wireless Network
Connection depending on your network
connection.
4. On the Support tab, click the Details
button. The Network settings are
displayed.
To enter the Network Settings into your
player, follow these steps:
1. In the Home menu, press the ◄► buttons
to select Settings, and then press the
ENTER button.
2. Press the ▲▼ buttons to select Network,
and then press the ENTER button.
3. Press the ▲▼ buttons to select Wired
Network Settings, and then press the
ENTER button. The Wired Network
Settings screen appears.
4. Select the Internet Protocol Setup field,
and then press the ENTER button.
5. Press the ▲▼ buttons to select Manual,
and then press the ENTER button.
6. Press the ▼ button to go to the first entry
field (IP Address).
7. Use the number buttons on your remote
to enter numbers.
8. When done with each field, use the ►
button to move to the next field. You can
also use the other arrow buttons to move
up, down, and back.
9. Enter the IP Address, Subnet Mask,
and Gateway values in the same way.
10. Press the ▼ button to go to DNS.
11. Press the ▼ button to go to the first DNS
entry field.
12. Enter the numbers as above.
13. Press the RETURN button on your
remote.
14. Run a Network Test to ensure the player
has connected to your network.
Network Test
Use this menu item to connect to the wired
network or check whether your network
connection is working or not.
Network Status
Use to check whether a connection to
the network and the Internet have been
established.
BD-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
• Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• Prohibit : No Internet connection is allowed
for any BD-LIVE content.
NOTE
✎
▪ What is a valid certificate?
When the player uses BD-LIVE to send the disc data
and a request to the server to certify the disc, the
server uses the transmitted data to check if the disc
is valid and sends the certificate back to the player.
▪ The Internet connection may be restricted while
you are using BD-LIVE contents.
2012-04-13 오후