Samsung BD-ES5000 Manuel D'utilisation page 12

Setup
The Initial Settings Procedure
1. Turn on your TV after connecting the
player.
When you connect the player to a TV for the
first time, the player turns on automatically
and the Initial Settings screen appears.
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
> Move
2. Use the ▲▼ buttons on the remote to
select the desired language, and then
press the ENTER button.
3. Press the ENTER button to select Start.
4. Use the ▲▼ buttons to select an Aspect
Ratio, and then press the ENTER button.
5. Select Auto, and then press the ENTER
button. If you do not have a home
network, press the BLUE (D) button on
your remote. You will go directly to the
Home menu.
6. The Blu-ray player automatically verifies
your wired network. When verification
in complete, the screen displays "Your
network is operating properly." Press the
ENTER button.
12
02231Q-BD-ES5000-EN-ENG.indd 12
All manuals and user guides at all-guides.com
7. The "Initial settings completed." message
appears, and then the Home screen
appears.
- If you Blu-ray player does not connect to your
network or you want to connect manually, go to
Network Setup on page 16.
NOTE
✎
▪ The Home menu will not appear if you do not
configure the initial settings except as noted
below.
▪ If you press the BLUE (D) button during network
setup, you can access the Home menu even if
the network setup is not completed yet.
▪ When you return to the Home menu, the full
screen mode is cancelled automatically.
" Select
▪ If you want to display the Initial Setting screen again
to make changes, press the STOP ( @ ) button
on the front panel of the player for more than 5
seconds with no disc inserted. This resets the player
to its default settings.
▪ If you want to use an Anynet+(HDMI-CEC)
function, please follow the instructions below.
1) Connect the player to an Anynet+(HDMI-
CEC)-compliant Samsung TV using HDMI
Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Initial Settings Procedure.
▪ If you leave the player in the stop mode for more
than 5 minutes without using it, a screen saver
will appear on your TV. If the player is left in the
screen saver mode for more than 25 minutes,
the power will automatically turn off.
Menu Navigation
1
2
HOME Button : Press to move to the Home
1
menu.
RETURN Button : Return to the previous
2
menu.
ENTER / DIRECTION Button :
Move the cursor or select an item.
3
Activate the currently selected item.
Confirm a setting.
EXIT Button : Press to exit the current
4
menu.
• Home Menu
YouTube
Videos
1
No Disc Change Device
View Devices Enter
"
a d
Selects Videos.
1
Selects YouTube.
2
Selects Photos.
3
Selects Music.
4
3
Selects Settings.
5
4
Displays the buttons you can use on the
6
remote to access functions.
Accessing the Settings Menu
To access the Settings menu and sub-menus,
follow these steps:
1. Press the POWER button.
The Home Menu appears.
2. Press the ◄► buttons to select Settings,
and then press the ENTER button.
3. Press the ▲▼ buttons to select the
desired submenu, and then press the
ENTER button.
4. Press the ▲▼ buttons to select the desired
item, and then press the ENTER button.
2
5. Press the ExIT button to exit the menu.
NOTE
✎
▪ The access steps may differ depending on the
menu you selected. The OSD (On Screen Display)
3 may change in this player after you upgrade the
software version.
4
5
6
2012-04-13 오후