Publicité
Les langues disponibles
Les langues disponibles
PR401IM + PR404IM
•
Attention: it is not necessary to put the bowl in the freezer beforehand. Thanks
to the built-in compressor, the ice cream maker freezes itself while the ice
cream is rotating.
ASSEMBLE
1.
Make sure the plug is not plugged in.
2.
Place the ice cream machine on a flat, stable surface.
3.
Place the removable bowl into the fixed bowl in the machine.
4.
Place the mixing spatula in the removable bowl by sliding the mixing spatula
over the shaft in the bowl so that it falls into position.
5.
Place the clear lid on the bowl and turn it counterclockwise to lock in place.
MAKING ICE CREAM
1.
Plug in the power cord.
2.
Using the selection button, choose the desired program:
•
You can use the mix function
refrigeration).
•
You use the ice cream function
and cool.
•
The cooling function
consistency and when you notice that the mixing spatula is no longer rotating
smoothly. Remove the mixing spatula and let the ice cream continue to harden.
•
While mixing, you can add additional ingredients through the filler opening in
the lid.
SELF-PROTECTION FUNCTION OF THE MOTOR
When the ice cream becomes too hard, the motor may become blocked.
The self-protection function then causes the motor to stop automatically.
•
Always turn off the unit before cleaning the unit.
•
Clean the housing with a damp cloth and some mild detergent.
•
Wash the following loose parts in warm water with detergent: transparent lid
and the removable bowl.
Time in the ice cream maker (function
Time in the ice cream maker (function
is used once the preparation has reached a firmer
6. MAINTENANCE AND CLEANING
7. RECIPES
to mix the ingredients a little better (without
to prepare ice cream. The appliance will mix
) : +/- 45 minutes
) : +/- 30 minutes
38
WWW.PRIMO-ELEKTRO.BE
Publicité
