Food Blender Use instructions
All manuals and user guides at all-guides.com
If you decide not to use the appliance any longer, make it unserviceable by simply cutting the supply
cable after disconnecting the plug from the socket. Also make any dangerous parts unserviceable,
especially for children who could play whit the appliance.
Let other potential users read these instructions.
Keep these instructions
USE ADVICE
When using the appliance make sure to stand it on a horizontal surface.
Do not use the appliance in a continuous way for more than 1 minute. Wait for another 1 minute
before switch on again the appliance.
The intern blades are very sharpen ; be careful and manipulate the blades carefully.
Do not touch parts of the appliance when moving.
Do never let the appliance working without supervision.
Do not try top remove the mixture from the bowl when the blades are moving. Always wait for com-
plete stop.
Do never immerge the motor, plug or supply cord into water or other liquids.
For cleaning use a wet cloth.
DESCRIPTION
A. Cap
B. Jar lid
C. Graduated jar
D. Blades
E. Motor unit
F. Speed selector (PULSE 0,1,2)
INSTRUCTION FOR USE
Make sure the appliance is plugged and the speed selector (F) is on position "0".
Put the graduated jar (D) on the motor unit (E) in the correct way and turn it anticlockwise until it is
blocked.
Cut fruits and vegetables in pieces and out the ingredients into the jar with water or milk. Do not
exceed the maximum capacity of the jar, that is to say 1200ml.
Put the cap (A) on the lid (B). Place the lid on the jar turning clockwise. Plug the blender to the
socket.
Switch on the blender by pressing the speed selector in position "Pulse", position "1" for low speed
and speed "2" for high speed.
When finished and desired consistence obtained, switch off the blender by pressing the speed se-
lector in position "0" and unplug it from the socket.
10