Electrical Safety:
1. Only use batteries and chargers supplied by the
manufacturer;
2. Never modify the charger in any way;
3. The charger has been designed for a specific voltage. Always
check that the mains voltage is the same as that stated on the
rating plate;
4. A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack;
5. Before use, check the charger cord for signs of damage or
ageing. A damaged or entangled charger cord increases the risk
of fire and electric shock;
6. Do not abuse the charger cord;
7. Never carry the charger by the cord;
8. Do not pull the cord to disconnect from a socket, grasp the
plug and pull to disconnect;
9. Don't wrap the cod around the charger when storing;
10, Keep the charger cord away from hot surfaces and sharp
edges;
11. The supply cord cannot be replaced. If the cord is damaged
the charger should be discarded and replaced. It must be
replaced by the manufacturer, its service agent or a qualified
technician in order to avoid a hazard.
12. Do not handle the charger or the appliance with wet hands;
13. Do not store or charge the appliance outdoors;
14. The charger must be removed from the socket before