Klipsch CP-T Serie Mode D'emploi page 11

All manuals and user guides at all-guides.com
STEP 9
Once speaker is in the final position and tested,
attach grill by pressing grill into channel encircling
speaker front
5
5
1
1
*SPEAKER GRILL REMOVAL: Use included grill removal tool, insert
2 4
into a top corner and gently pull out. Repeat on a corner next to 2 4
first one pulled, then pull out grill gently with hand. NOTE: the grill
is designed to fit snug on speaker to both remain on and to remain
3
3
tight. Continued removal/reinsertion of grill may make it loose and
subject to either vibration or slippage.
USING A DIFFERENT MOUNTING BRACKET
All CP Series speakers have a 1/4", 20-thread insert on the back
bottom that you can attach a different, compatible mount.
There is an additional 1/4", 20-thread insert a safety cable can be
mounted to.