ORBYS TAB F21 NEO Manuel De L'utilisateur page 72

Charging the device
The device contains a rechargeable Li-ion battery (not removable) which can be charged by
performing the following process:
Connect the USB power adapter to a standard electrical outlet (220V / 50Hz) that you
1.
are sure it is in a good condition.
2. Plug in the male connector USB-A of the cable into the adapter.
3. Plug in the male connector USB-C of the cable into port 4 (USB-C) of the device.
The device also has an auxiliary charge port (8) of the DC type 3.5mm. To charge using this port,
a DC 3.5mm 5V 2A charger is required (not included).
Precautions and advices about the charging
• The device cannot be charged using both charging ports (4) and (8) at the same time. It could cause
serious damage.
• The device does not need to reach 0% (completely discharged battery) to charge it. In fact, to
extend the life of your battery, it is recommended to charge it when the level is between 15% and
30% of its total capacity. By default, your ORBYS F21 NEO will alert you that it needs to be char-
ged when the battery is at 15%.
• It is recommended not to drain the battery completely as this may cause the tablet not to turn on.
If your ORBYS F21 NEO is completely discharged, put it on charge and wait about 10 minutes to
start it (to acquire sufficient charge). The battery logo will appear on the screen when it is ready.
You can then turn your device on.
• The charging time will depend on whether it is charged via a power adapter or via a USB port on
a PC.
The use of non-original power cables or adapters may cause serious damage to the device and
•
their use may result in the loss of warranty.
• The battery is not removable and must not be touched under any circumstances. Any removal or
modification of the battery may result in the loss of the warranty.
It is not recommended to use the device while it is charging. This will cause the charging to be
•
much slower.
Use only original adapters with the following requirements:
INPUT: AC 100V~240V, 50/60 Hz <> OUTPUT: 5V - 2A
The use of other types of adapters could cause serious damage to the device
and pose risks to people.
The battery level is shown on the main screen of the device with this symbol.
You can monitor the battery usage, view the percentage and activate the saving options from the
menu:
Applications > Settings > Battery
Adapter and cable included.