Télécharger Imprimer la page

LUCCI Air NORDIC Guide D'installation page 10

Ventilateur cc (alimentation en courant continu) de plafond

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
Nordic Installation Instructions
Remote Control Buttons
1 - FAN SPEED CONTROL BUTTON:
There are 6 available speeds. "I" button is for the lowest speed, and "VI" button
is for the fastest speed.
NOTE: when you turn on the fan for the first time or switch the main power to
the controller, you need to start the fan on hight "VI" speed first and then choose
a lower speed. A 5-10 seconds is required to allow the DC fan to respond to the
remote each speed or fan direction seletions.
2 - FAN OFF BUTTON:
Press the button to turn the fan off.
3 - REVERSE FUNCTION BUTTON:
Press the button to activate the reverse running function. The fan must be
operating to activate the reverse function.
4 - LIGHT CONTROL BUTTON:
Press the button to turn the light ON/OFF.
THE RECEIVER PROVIDES THE FOLLOWING LEVEL OF PROTECTION:
Lock position: the receiver has a built in safety feature to protect against
obstruction during operation. The motor will be locked from operation and
will disconnect from power after 30 seconds of interruption. Please remove obstacles before re-starting. To reset,
simply turn off the power supply to the fan motor and re-start.
Over 80W protection: when the receiver detects power consumption which is greater than 80W, the receiver power
will be stopped and operation will immediately discontinue. Turn the receiver power on after 5 seconds to restart the
fan.
9 | P a g e
Fig. 10
Fig. 13

Publicité

loading

Ce manuel est également adapté pour:

Nordic serie