Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
3.
For capacitors with known polarity connect the red test lead with the
anode and the black test lead with the cathode. Once the reading
stabilizes, read the value. Use the HOLD function if the reading is difficult
to read.
Temperature measurement
1.
Set the rotary switch to the position TEMP
2.
Select with the "SEL" button °C or °F
3.
Attach the adaptor of the temperature probe to the instrument. (⊝ -
Symbol to the COM jack and ⊕ - Symbol to the °C°F jack.) Press MODE to
select "°F" or "°C".
4.
Connect the device to the K-probe. Observe the correct polarity!
5.
Connect the temperature probe to the device to be tested wait a few
moments and read the value displayed.
If necessary, use heat conducting paste.
Contactless Voltage tester
Hold the tip of the measuring instrument to an electrical outlet or to a cable.
When the voltage is applied, a beep sounds and the LED indicator (5) lights up.
9. Maintenance
Only authorized service technicians may repair the instrument.
If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
- Condition of the test leads.
EN 14
Publicité
