Publicité
Les langues disponibles
Les langues disponibles
Apply
Plumbers
Putty.
Deck/Rim
1. Stand Alone Spout Installation
Apply sealant tape to the short threaded end of the spout shank.
Thread the short end of the spout shank into the spout.
Apply plumbers putty or other sealant on the underside of the
spout according to the manufacturer's instructions.
Position the spout in the mounting hole.
From the underside of the deck, assemble the washer and locknut
to the spout shank.
Position the spout and tighten the locknut.
Connect the spout to the supply as needed.
For connections to side body valves, go the next section.
Kohler Co.
All manuals and user guides at all-guides.com
Spout
Spout
Shank
Washer
Locknut
3
105614-2-AB
Publicité
