Samsung DMR57 Serie Guide D'installation page 5

preparing the dishwasher
enclosure
PRODUCT DIMENSIONS
Side view
(DMR78 series/
DMR77 series)
Side view
(DMR57 series/
DMT300 series)
CUTOUT DIMENSIONS
This dishwasher is designed to be enclosed
on the top and on both sides by a standard
residential kitchen cabinet unit.
The installation enclosure must be clean and free
of any obstructions.
The enclosure must be at least 24 inches wide,
24 inches deep, and 34 1/8 inches high.
For the front door of the dishwasher to be fl ush
with the leading edge of the counter top, the
counter top must be at least 25 inches deep.
DMR77LH_DMR57LH-00027A_EN_v1.indd Sec5:5 DMR77LH_DMR57LH-00027A_EN_v1.indd Sec5:5
27" (686 mm)
20 ½ " (520 mm)
24 ½ " (622 mm)
25" (635mm)
20 ½ " (520 mm)
24 ½ " (622 mm)
Rear view
2" (50 mm)
24" (610 mm)
minimum
preparing the dishwasher enclosure _5
23 7 ⁄ " (606 mm)
8
The water supply
line, power cable and
drain hose should
go through this
space behind the
dishwasher. Then,
they run in channels
under the dishwasher
to connections in the
front.
24" (610 mm)
minimum
2011-04-05 2011-04-05 2:17:04 2:17:04