MTD Yard Machines MTD25P Manuel De Utilisation page 8

If you receive your unit assembled, check each step to
insure your unit is properly assembled. Follow all safety
information in the manual and on the unit.
ASSEMBLY
1. Assemble three parts into unit. (Fig. 1)
2. Take out assembly screw bolts, washers, nuts from
parts pack and lock into the unit holes (the correspond
location are as Fig. 2)
3. First of all, put the nut in the hole, then support the nut
with your finger and put plug the bolt and washer in
from other side and tighter. (Fig. 3)
Arrows
All manuals and user guides at all-guides.com
ASSEMBLY INSTRUCTIONS
Fig. 1
Fig. 2
Fig. 3
DEBRIS SHIELD INSTALLATION
Assemble shield as shown (Fig. 4). Keep hands and fingers
away from the sharp blade. Twist shield in direction of arrow
to assemble.
7
Fig. 4