APLIC 302655 Mode D'emploi page 30

Time:
All manuals and user guides at all-guides.com
The current time in 12 or 24 hour mode is displayed here.
Stop watch:
Press the "SET" button to start or stop the stopwatch. The stopwatch
is reset if you press and hold the "SET" button for 3 seconds. This
function works only in the stopwatch mode.
Ride time (RTM)
The ride time since the last reset is registered in this mode and this is
shown in the display.
Distance covered (DST)
Records the distance covered since the last reset and shows this in
the display.
Maximum speed (MXS)
Records the maximum speed since the last reset and shows this on
the display.
Average speed (AVS)
Records the average speed since the last reset and shows this on
the display. The average speed is calculated by dividing the distance
covered with the ride time.
Total distance covered (ODO)
The total distance covered in kilometres is indicated in this mode. The
total distance covered can be re-configured in the startup settings
when the battery is replaced.
Scan
The "scan" mode changes automatically every 4 seconds between
ride time (RTM), distance covered (DST), maximum speed (MXS), and
average speed (AVS).
25
English