APLIC 302655 Mode D'emploi page 22

4 Installation and Assembly
All manuals and user guides at all-guides.com
Take the device out of the package and remove all the packaging
material. Before installing, make sure that the device is not externally
damaged.
Inserting the batteries
Before commencing the installation, insert the battery into the bat-
tery compartment. To do this, open the battery compartment on the
back of the device using a coin or similar object by rotating it counter
clockwise. Insert a CR2032 1.5V battery into the battery compartment.
Ensure that the positive pole of the battery is pointing towards the
battery compartment cover. Then close the battery compartment.
Installing the bracket
Glue the wide foam plate on the inside of the curve to avoid any
possible slippage. Place the bracket with the curve facing down in the
desired position on the handlebar of your bicycle.
18
English