Publicité
Les langues disponibles
Les langues disponibles
DOOR REVERSE
Users can change the direction of opening according
to one's own needs. The concrete operating sequence
is as follows:
1. Unscrew the two screw(8) that hold the bottom
hinge(5)(right side) to the frame.Take away the
bottom hinge(5);
2. Unscrew the four screws(1) that holding the top
cover(10);
3. Unscrew the three screws(4) that inserted in right
upper hinge(3);
4. Unscrew the screw nut of the right upper hinge
bin(2). Refit the upper right hinge bin(2) into the left
upper hinge(11);
5. Lift the door off the right upper hinge(3) and place it
on a flat surface to prevent scratching it;
6. Unscrew the left front leg(9) and transfer it to the
right side;
7. Set the door in place, making sure the door seat at
the left upper hinge bin(11);
8. Before placing the bottom hinge(5), remove the bolt-
pin(6) and reverse the direction of the bottom
hinge(5). Then install the bottom hinge(5) onto the
left side of the lower frame with two screws(8);
9. Insert the bolt-pin(6) into the bottom hinge(5);
10. While holding the door in the closed position,
attach the bottom hinge(5) onto left side of the
bottom frame with two screws(8), do not tighten the
two screws(8) until the top of the door is parallel to
the counter top.
-39-
Publicité
