Honda HP500H Manuel De L'utilisateur page 53

2.Change the engine oil (see page 37 for details).
3.Clean the cleaner (see page 39 for details).
4.Clean the power carrier and inspect all parts to make sure they are
securely tightened. Lubricate the points noted on page 46.
NOTE:
If the carrier will be stored for more than three months, remove the
spark plug, pour one tablespoon of clean engine oil into the plug hole
and reinstall the spark plug securely.
5.Pull the starter grip until you feel slight resistance.
6.Place a cover over the power carrier or store it in a well-ventilated
enclosed location.
CAUTION:
When storing the power carrier, first allow the engine exhaust system
to cool off completely and then place the power carrier far from any
combustible products.
50
PULL
STARTER GRIP