Honda HP500H Manuel De L'utilisateur page 40

Engine oil change
NOTE:
Drain the oil while the engine is still warm to assure rapid and complete
draining.
Changing the oil
1.Remove the engine oil filler cap and
loosen the oil drain bolt.
2.Set the oil funnel as shown, remove
the oil drain bolt and drain the oil
into a suitable container.
3.Once the oil has been drained,
tighten the oil drain bolt securely.
4.Fill with new recommended engine
oil (see page 15) to the top of the
oil filler neck.
5.After replenishment, tighten the cap
securely.
Oil capacity:
0.58 L (0.61 US qt, 0.51 lmp qt)
Wash your hands with soap and water
after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or pour
it on the ground.
OIL
DRAIN
BOLT
ENGINE OIL
FILLER CAP
UPPER LEVEL
OIL FUNNEL
37