Operation; Basic Weighing Function - Denver Instrument TP Série Mode D'emploi

Operation

Basic Weighing Function

Preparation
§ Turn on the balance:
Press [ON/OFF]
§ To change configurations: See
the chapter entitled "Configuring
the Balance"
$ To tare the balance: Press [TARE]
Additional Functions:
§ To turn off the balance:
Press [ON/OFF]
Example
Basic weighing
Step
1. Turn on the balance
Self-test is performed
2. Place container on balance
(here: 52 g)
3. Tare the balance
4. Place sample in container
on balance (here: 150.2 g)
Warmup Time
$ To ensure accurate results, the bal-
ance must warm up for 60 minutes
before operation. Only after this
time will the balance have reached
the required operating temperature.
Key (or instruction) Display/Printout
[ON/OFF]
[TARE]
+
52.0
g
+
0.0
g
+
150.2
g
9