Configuring The Balance; Setting The Parameters (Menu Codes) - Denver Instrument TP Série Mode D'emploi

Configuring the Balance

Setting the Parameters (Menu Codes)

You can configure your balance to meet individual requirements by selecting
from the parameters available in the menu.
Example: Adapt the balance to unstable ambient conditions
Menu code 1. 1. 4
Step
1. Turn off the balance
2. Turn the balance back on;
while all segments
are displayed
$ To navigate within a menu
level; the last menu option is
followed by the first option
3. Select the 2nd menu level
4. Select the 3rd menu level
5. In Menu Level 3:
Select the desired option
6. Confirm new setting;
the "o" indicates the currently
set option
$ Select the next menu level
(here: move from the 3rd to
the 1st level)
$ Set other menu codes, if desired [PRINT], [TARE]
7. Store parameter settings
and exit operating menu
or
$ Exit operating menu
without storing changes
> Restart the application
Key (or instruction)
[ON/OFF]
[ON/OFF]
[TARE] briefly
[TARE]
repeatedly
[PRINT]
[PRINT]
[TARE] repeatedly
[PRINT] >2 sec.
[PRINT]
[TARE] >2 sec.
[ON/OFF]
Display
1.
2.
· · ·
9.
1.
1. 1.
1. 1. 2
o
1. 1. 4
1. 1. 4
o
1.
0.0
g
17