Publicité
Les langues disponibles
Les langues disponibles
2. Select the wireless AP you want to connect to.
: Locked with Security Code
: Signal Strength
• You can check the MAC address of the Fridge on the bottom of the Screen.
• If there are no APs showing on the screen, press the [Search] menu at the bottom.
• Depending on the wireless AP type, the refrigerator may not make a connection.
We recommended you use a wireless AP that supports IEEE802.11b/g/n.
• If you don't have a wireless router, please contact your Internet provider or purchase and install
one yourself.
• If you can't remember the name of your wireless network system (SSID) or its security code,
please see the user manual of your router.
• Radio frequency signals can interfere with any the wireless network system and they may affect
the network performance of your refrigerator.
• Obstacles such as concrete walls and metallic doors and radio and microwave interference
from devices such as microwave ovens can affect the operation of your wireless network
system.
• Depending on the type and location of your wireless network system and the surrounding
environment, the range and quality of your wireless network may vary.
3. If your wireless network has a security code enter the
security code, and then press the [OK] button.
In most cases, after you have entered the security
code, the refrigerator acquires the Network addresses
it needs (IP Address, Subnet Mask, Gateway, and
DNS) to connect to the network. If it does not or you
need to enter these values manually, go to Step 5.
DA68-03055A-08.indb 80
All manuals and user guides at all-guides.com
English - 80
2016. 3. 30.
2:45
Publicité
