Publicité
Les langues disponibles
Les langues disponibles
WARNING
Disassembling the refrigerator doors
Be careful not to drop and scratch the doors while
removing them.
Required Tools (Not provided)
You need the following tools to complete the
installation of your refrigerator:
Philips
Flat-blade screw
screwdriver (+)
driver (-)
Allen wrench
Pliers
(3/16") (5 mm)
DA68-03055A-08.indb 13
All manuals and user guides at all-guides.com
With the door opened
1. Remove 3 screws holding down the TOP
2. Disconnect two connectors ( 2 ) on the left side
Socket wrench
(13/32") (10 mm)
3. Pull and remove the hinge lever ( 5 ). Remove
English - 13
TABLE ( 1 ) and separate the connected wires.
door. To remove the water coupler from the
hinge, twist and pull it from the hinge.
Remove the water line ( 3 ) while pressing the
marked part ( 4 ) of the water line coupler.
(2)
(3)
(4)
the ground screw ( 6 ) attached to the upper
left door hinges with a philips screwdriver (+).
Remove the upper left and right door hinges
( 7 ).
(5)
(7)
(1)
(6)
2016. 3. 30.
2:44
Publicité
