Publicité
Les langues disponibles
Les langues disponibles
3. Vegetable & Fruit Drawers
To remove
• Simply lift the bin up and pull straight out.
• Tilt up the front of the drawer and pull straight
towards you. Then, move the drawer slightly
in the direction of the arrow in the illustration
below, and then pull out.
To re-install
• Insert the drawer into the frame rails and push
back into place.
• Slide the bin in above the desired location and
push down until it stops.
CAUTION
The drawers need to be removed before the glass
shelf above them can be lifted out.
DA68-03055A-08.indb 103
All manuals and user guides at all-guides.com
4. Flex Zone
- To remove the Flex Zone : Pull the Flex door out
- To re-install the Flex Zone : Open the Flex door
If the Flex Zone or LED lighting is not
working, check the connectors [ ( 1 ), ( 2 )
shown below ] for cracks or leaks.
1. Disassemble the Flex Zone. Refer to page 14
2. Open the cap cover rail with a flat-blade
3. Examine the connectors.
English - 103
to full extension. Lift the Flex Zone up, pulling it
to your body with both hands.
to full extension. Tilt the front of the Flex Zone
up, place the back of the Flex Zone onto the
rails, and then lower the front until the whole
Zone rests on the rails.
(1)
for disassembly instructions.
screwdriver.
(2)
2016. 3. 30.
2:45
Publicité
