Publicité
Les langues disponibles
Les langues disponibles
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry
Canada (IC) radio frequency exposure limits.
Accessories
Bluetooth adapter ······················································<1>
(This is not used with a Bluetooth built-in TV.)
AAA battery,R03 battery ·············································<1>
< > indicates the quantity.
Identifying Controls
Unit cover
Pen tip
Power button
Press the button once to turn the power on. Pressing the button for
approx. 2 seconds or longer while the power is on will turn the power off.
This is also used when registering the Touch Pen on the
television. For details on registration, refer to the Registration
page. (
page 9)
The Touch Pen automatically turns off if unused for 5 minutes.
Indicator lamp
Lights or fl ashes while using or charging to indicate the status of
battery level and Touch Pen.
• Lights for approx. 2 seconds when turned on, and then blinks
at approx 2-second intervals.
Up to two Touch Pens can be used. The indicator blinks in red with
Touch Pen 1 operation, and green with Touch Pen 2 operation.
• Also lights or blinks when registering the Touch Pen to the TV.
For registration, see "Registration". (
• Blinks 5 times consecutively at power-on when the battery level is low.
Pen tip
Press the pen tip on this side of the Touch Pen against the screen for use.
Wrong use may scratch the screen.
Unit cover
See "Inserting the battery" page. (
IC STATEMENT
Power button
page 8)
(N5HZZ0000136)
Indicator lamp
page 9)
7
Publicité
