Panasonic TY-TP10U Mode D'emploi page 11

Attaching the Bluetooth adaptor
Attaching the Bluetooth adaptor is required when using the
Touch Pen with a TV if it is not equipped with the Bluetooth
communication function.
1. Press the power button on the TV to turn the TV off.
2. Insert the connector of the Bluetooth adaptor to the USB
terminal on the TV.
3. Remove the release paper of the two-sided tape attached
to the back side of the Bluetooth adaptor, and attach the
Bluetooth adaptor with the two-sided tape to the position on
the TV shown in the fi gure.
Attach as shown below
USB connector
Bluetooth adaptor
( Remove the release
paper and attach.)
Bluetooth adaptor
Two-sided tape
®
11