Publicité
OPERATING INSTRUCTIONS
FLUSHING
4. The red Power On/Heating Light will turn off when the iron has
reached the desired setting.
5. Wait for one more cycle, the red Power On/Heating Light will cycle
on and back off again.
6. Move the Temperature Control to the OFF position.
7. Unplug cord from outlet.
8. Steam and hot water will flow through the vents on the Stainless
Steel Soleplate, washing away the scales and minerals that have
built-up in the iron.
9. Gently move the iron back and forth until the Water Tank is empty.
10. Press the Variable Steam Button and turn the Variable Steam to the
no steam position.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user service-
able parts. Do not try to repair it yourself. Refer it to a qualified appli-
ance repair technician if servicing is needed.
CARE AND CLEANING
CAUTION: Unplug the iron from the electrical outlet and allow to cool
before cleaning the exterior of the iron and storing. Never immerse the
iron in water.
NOTE: Do not put any chemical cleaning agents or solvents in the
water tank.
To protect the Stainless Steel Soleplate from scratching, avoid ironing
over snaps, zippers, metal buttons, etc. Also, do not place the iron on
metal surfaces.
If starch or other residues cling to the Stainless Steel Soleplate, use a
hot iron cleaner according to directions. Hot iron cleaner is available at
mass merchandise, discount or hardware stores.
STORAGE
Remove the cord from the outlet by grasping the plug rather than
pulling the cord. Empty the Water Tank after each use, see EMPTYING
THE WATER TANK. Allow the iron to COOL COMPLETELY before
putting away. To protect the Stainless Steel Soleplate, place the iron in
an upright position on its heel. Wrap cord around iron base.
(Cont.)
(Cont.)
12
Publicité
