Publicité
OPERATING INSTRUCTIONS
BURST OF STEAM
For a penetrating burst of steam to iron faster
and to smooth difficult wrinkles, firmly press
the Burst of Steam Button (see FIGURE 9). The
red Power On/Heating Light must be on for
best results. Do not press the Burst of Steam
Button more than three times successively.
Pause for at least 5 seconds to let the iron reheat for additional steam.
For maximum steaming, keep the Water Tank at least half full.
SPRAY
For a mist of water to moisten the dry and
difficult fabrics such as linen, cotton or
wool, or to handle stubborn wrinkles, aim
the Spray Nozzle and press the Spray
Button (see FIGURE 10). The spray function
is also handy to moisten creases accidental-
ly ironed into the fabric. The spray function can be used on any setting
and does not affect the ironing temperature.
NOTE: You may have to pump the Spray Button several times the first
time you use the iron each session to start the spraying action.
USING THE VERTICAL STEAM FUNCTION
The vertical steam feature allows you to eliminate wrinkles from drapes
without having to take them off the rod or to freshen the appearance of
clothing on the hanger.
1. Unplug the iron from the outlet.
2. Position the Temperature Control to the
OFF position.
3. Fill the water tank with water, see FILLING
THE WATER TANK.
4. Stand the iron on its heel in an upright posi-
tion on a heat-resistant surface. Plug into
120 V ~ 60 Hz outlet.
(Cont.)
10
FIGURE 9
FIGURE 10
FIGURE 11
Publicité
