GE 29582 Mode D'emploi page 22

Memory Full
When the unit's memory is full, it answers after 10 rings and announces, "Memory is full.
No messages will be recorded." A 20-second waiting period follows, allowing you to enter
your security code.
Remote Access
You can access your answerer from any touch-tone phone from another location by
entering your 3-digit security code (the default security code is 1 2 3, but you can change
it.) Be aware that remote functions do not work with rotary or push-button pulse-dialing
phones.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting, enter your 3-digit security code. The
unit confirms your code with a double beep and plays the remote menu. IF the wrong
security code is entered the unit beeps three times and allows for correct code to be
entered.
NOTE: To bypass the greeting, you can enter your -digit security code
any time while the greeting is playing.
The unit waits for a remote command for 20 seconds after the correct security code has
been entered. Menu selections can be made while the menu is playing.
NOTE: The unit answers on the 10th ring when it is turned off or the
memory is full. To access the answerer, enter the -digit security code
after the beep. If memory is full, play messages and erase some of
them to restore memory.
NOTE: After the unit plays the remote menu, it waits 20 seconds for a
command, then disconnects.
22
All manuals and user guides at all-guides.com