GE 29582 Mode D'emploi page 10

Wall Mounting the Phone
1. To prepare for wall mounting, wrap excess
telephone cord, if any, around the hooks provided
on the wall mount bracket. Be sure to leave
enough cord for connecting to the base at the top
and the wall jack through the center cut out of the
wall bracket.
2. Plug the line cord into the jack of the base.
3. Align the line cord with the small cut out in the wall
mount bracket.
4. Align and inset the two sets of small tabs of the
wall mount bracket into the base at the top. Then gently press into the two sets of
bottom grooves until it snaps in place.
5. Connect the small end of the power adapter into the POWER 7.5V AC jack on the back
of the answerer. Secure the cord of the power adapter in the groove on the wall mount
bracket.
6. Carefully turn the handset hook180 with a coin or screwdriver until it points upward
(the WALL imprint will be right side up). You need to do this so the at the handset
doesn't fall out of the base.
7. Connect the line cord to the wall phone jack, through the center cutout of the wall
mounting bracket.
8. Slip the mounting of the base (on bottom of unit) over the wall plate post and slide the
base down until the phone is firmly in place.
9. Plug one end of the coiled cord into the handset. Plug the other end into the jack on
the side of the base.
10. Place the handset on the base.
11. Plug the AC Power adapter into an AC power outlet. The screen displays PLEASE
WAIT... then announces: "Press menu key to set up unit". The unit is ready for
Answering System Set Up.
10
All manuals and user guides at all-guides.com