LEXIBOOK ThermoClock RL851 Mode D'emploi page 4

No function is associated with the UP button.
A: Presentation of the equipment
Current time displayed on the top display, the display at the centre shows the
month, date, day of the week, and the lower display shows the temperature.
Keep pressed down the MODE button to display the time set for the alarm.
No function is associated with the UP button.
Press on DOWN to select the following display mode: 12 or 24-hour clock.
Press on ºC/ºF to select the following display mode: Temperature in Centigrade
(Cº) or Fahrenheit (Fº).
Press on SNOOZE to stop the alarm and the stopwatch once these are in use.
B: Setting the time
Position the selection button at the back of the equipment on T.SET.
Press on MODE to set the hours, minutes, year, month and date: The parameter to
be modified will blink on the display, use the UP or DOWN buttons to increase or
decrease the value of the parameter. The day of the week is automatically identified.
Place the selection button back to NORMAL.
C: Setting and stopping the alarm
Position the selection button at the back of the equipment on AL.SET. The
parameter to be modified will blink.
Press on MODE to set the hours, minutes, and the duration of the snooze function:
Press the UP or DOWN button to increase or decrease the value of the parameter;
the repetition of the snooze function is between 1 and 60 minutes.
Place the selection button back to NORMAL.
Slide the selection button to the AL.ON position in order to activate the alarm, the
Z
symbol
Z
again, place the selection button on SNZ.
Once the alarm sounds, press on SNOOZE to stop momentarily the alarm, the
Z
symbol
To exit the alarm mode, slide the selection button to the AL.OFF position, the
symbols
D: Stopwatch and countdown function
Place the selection button on the TIMER position, the word TIMER will show on
the lower part of the top display. The maximum count either up or down is 29:59:59
Press on MODE, then on UP or DOWN to set the hours, minutes and seconds.
2
All manuals and user guides at all-guides.com
Functions and settings
will show on the top display. If you want the alarm to sound
Z
will blink on the display
Z
and Z will disappear from the display.
Copyright © Lexibook 2004