Pattern Adjustment
nOZZlE
The Turbo Wand (30c) features a fixed Nozzle which increases the Pressure
5.
Washer's effectiveness and decreases its cleaning area, and is recommended
for heavy duty cleaning of small areas. The spray pattern on the Turbo Wand is
not adjustable, but provides a circular water pattern as it sprays the high pressure
water. The Turbo wand must only be used on areas that cannot be cleaned with
the normal nozzle and are resilient enough to withstand the increased pressure
involved. (See Figure K.)
The built-in Detergent Dispenser locat-
6.
ed in the Handle (28a) allows the ap-
plication (USING THE BRUSH WAND
OR SPRAY WAND LOW PRESSURE
SETTING ONLY) of pressure washing
detergent (not included) onto the work
surface. When filling the Detergent
Dispenser with pressure washing
detergent, do not exceed 3 quarts of
detergent. The Pressure Washer will
automatically mix the detergent and
water. Note: Detergent is dispensed
in a 6% solution. Do not add water to
the Detergent Dispenser.
cAUtIOn! NEVER use any products not
designed for pressure washer use,
nor any products with bleach, chlo-
rine, or any other corrosive materials,
including liquids containing solvents,
trisodium phosphate products, am-
monia, or acid-based cleaners.
Fill the Detergent Dispenser only
when the unit is not running or plugged in.
(See Figure L.)
for technical questions, please call 1-800-444-3353;
SKU 95338
troubleshooting section at end of manual.
All manuals and user guides at all-guides.com
SPRAy WAnd
(31c)
fIgURE j - AdjUStMEntS
Pressure Adjustment
–
Low
Detergent
fIgURE k
dEtERgEnt dISPEnSER fIll cAP
fIgURE l
+
High
Water Only
tURbO WAnd
(30c)
PAGE 13